Subject | Text |
Re: Yamaha Sw-3 | [quote:e6778a520b="spar10"]I'm in search of a service manual for a Yamaha Sw-3 model Sub woofer.[/qu |
Code for vwz1z1v1435827 | hello
I need a code for my blaupunkt alpha cc
7 646 236 060
stamped on radio is
vwz1z1v14 |
|
Blaupunkt-WERKE GmbH | Hi, I need the code for volkswagen
Blaupunkt-WERKE GmbH
VWZ1Z1T7007584
7644840060
Alpha CC
|
| My friends CSW250 sub has also burnt out at R24. Please email [email protected] if you find the res |
home subwoofer | my sub does not power up,can anyone help????? PEASE... |
| My PSW-3000 started to do the same thing. Works for a few seconds/minutes then it makes a sudden sou |
| awesome reply! i'll check out all of these things.
apon closer inspection i found a white box(i do |
Re: Wharfedale EVP series powered speaker schematic | [quote:73d80ce325="froady"]Any model from the EVP-12 to EVP-18 would be helpful - I have a EVP-15PSB |
| I believe that's an obsolete Dual Nand driver. Remember the base numbering would be 75452P. (MC) w |
Fender amp repair | Hi -
I´m trying to fix a Fender Blues Junior amp for a friend. Seems like a simple dry join |
| Not sure how much you know about the system?
You see, the "SAW541/542" was not just the |
| Solder Link lead throughs on signal processor sub board ZK14,16,19 |
Re: Gateway FPD2185W Monitor display goes off after logo | [quote:cbc83240aa="stratman"]I have a Gateway FPD2185W that shuts down after the logo is displayed. |
Toshiba 3787DB - Very low Base / Woofer output | Getting a very low output on the sub woofer, with the sub and the base turned all the way up you can |
| [quote:e49eaef5fd="vtech"]Should not be difficult to determine as to why your sub/w is not working. |
Faulty Black Diamond Tv | Not sure but it may be AK19PRO chassis. I copied and pasted fault info on AK19 series below to see i |
Re: Blaupunkt-WERKE GmbH | [quote:16b838d400="tmcu"][quote:16b838d400="gelo"]Hi, I need the code for volkswagen
Blaupunkt-WER |
|
| Hi, i own the same model.
I have a psu problem that im solving right now.
I found that one of the |
| Vtech thanks for the response.
I should have been more specific.
This is one of several diodes |
hud25 | tv hyundai hud25 to unlock press on/off & sub.page |
| Here's the parts that I used:
[url=R509 100K Ohm 1W resistor[/url] - got an set on Amazon. I prob |
Re: VW Blaupunkt code need | [quote:99a5a16085="ikszipszilonrobot"]Hi Masters,
I have a new used VW car and the radio code is |
VW radio code | Hi everyone!
lost code for auto radio
Blaupunkt Alpha CC EU BVX
815 7 648 238 360
6X0 035 |
| Thank god for this post, the reds and greens were too strong on my 2060u and this helped me fix it c |
Component ID | Ahhhh . . Fast or ultra-fast recovery diode - that's most likely the problem. I didn't think of that |
Found a service bulletin | SYMPTOM;
The DSP fails to operate properly. Unusual noise is made or no sound is heard.
[i:559c1 |
JAW 541 | I have been folowing this post regarding the SAW 541 sub/amp. I am curious if anyone found a way to |
| Observing the sub forum you've posted this to, I'd recommend swapping out your brain and resubmittin |
| 392-010's sub to 392-020's, 392-020's sub to 392-040's. It's all a watt game. STK392-040's are a hig |
Why can channel output restored by tapping speaker cone? | I suspect I have a problem in the right channel of a '79 Nikko Alpha II power amp (100 watt rms/ch), |